Been busy working on the right side of the fuselage and the horiz stab. The right side of the fuselage is done. I made some doublers to go around the fitting where the rudder cable exits the fuselage. They will support the Oratex there so I don't have any issues later on. The plan is to make a fairing that will go over the exit point and nicely cover this spot. The doubler will provide me some support for the fairing as well. I completed the horiz stab covering so that part is ready for finishing tapes along with all the rest of the parts. I did put finishing tapes on the fuselage so that's complete. Since I am getting ready to close off the right top of the fuselage, I installed the transponder so it is good to go.